the connor-winfield corp. 2111 comprehensive drive. aurora, il 60505. fax (630) 851-5040. phone (630) 851-4722. www.conwin.com product data sheet specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. crystal controlled oscillators the connor-winfield models hsm626 and hsm636 are 5.0v hcmos, surface mount, fixed frequency crystal oscillators (xo) designed for use in all applications requiring precision clocks over the -4 commercial temperature range. the surface mount package is designed for high-density mounting and is optimum for mass production. 0 to 85c, 12 hsm636 - 028.665m clock series center frequency 1.8 to 80 mhz 5.0v operation tri-state enable / disable function overall frequency tolerance: hsm626 50ppm hsm636 100ppm temperature range: -40 to 85c ceramic surface mount package tape and reel packaging rohs compliant / pb free 5.0v surface mount 11x6.35mm hcmos clock oscillator sm016 07 04/01/09 ordering information features description hsm626, hsm636 dimensional tolerance: .02? (.508mm) .005? (.127mm) pad connection 1 enable/disable 2 ground 3 output 4 vcc .252 (6.35mm) .433 (11.05mm) .200 (5.08mm) .104 (2.67mm) .098 (2.54mm) .043 (1.14mm) typical 4 places hsm636 28.665 cw 4g absolute maximum ratings table 1.0 parameter units minimum nominal maximum units note storage temperature -55 - 125 c supply voltage (vcc) -0.5 - 7.0 vdc model specifications: table 2.0 model hsm626 frequency range (fo) 1.8 - 80 mhz frequency tolerance: -50 - 50 ppm 1 model hsm636 frequency range (fo) 1.8 - 80 mhz frequency tolerance: -100 - 100 ppm 1 operating specifications table 3.0 parameter minimum nominal maximum units note operating temperature range -40 - 85 c supply voltage (vdd) 4.5 5.0 5.5 vdc supply current 1.8 to 19.999 mhz (icc) - - 20 ma 20 to 49.999 mhz (icc) - - 30 ma 50 to 69.999 mhz (icc) - - 50 ma 70 to 80.0 mhz (icc) - - 80 ma input characteristics table 4.0 enable voltage (vih) 2.2 - - vdc 2 disable voltage (vil) - - .08 vdc enable time - - 100 ns disable time - - 100 ns hcmos output characteristics table 5.0 parameter minimum nominal maximum units note load - - 50 pf voltage (high) (voh) 4.50 - - vdc (low) (vol) - - 0.50 vdc current (high) (ioh) -16 - -ma (low) (ioh) - - 16 ma duty cycle at 50% of vcc 45 50 55 % rise / fall time 10% to 90% - - 5 ns start-up time - - 10 ms jitter (bw=10hz to 20mhz) - - 5 ps rms jitter (bw=12khz to 20mhz) - - 1 ps rms note: 1) inclusive of calibration @ 25 c , frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2) oscillator output is enabled with no connection on pad 1 package characteristics table 6.0 package hermetically sealed ceramic package and metal cover
the connor-winfield corp. 2111 comprehensive drive. aurora, il 60505. fax (630) 851-5040. phone (630) 851-4722. www.conwin.com product data sheet specifications subject to change without notice. data sheet #: rev: date: page of copyright 2001 connor-winfield all rights reserved. crystal controlled oscillators 22 sm016 07 04/01/09 1.00 (25.4mm) 0.08 (2.0mm) 0.08 (2.0mm) 10.00 (254.0mm) 3.15 (80mm) 0.47 (11.9mm) 0.27 (6.8mm) 0.45 (11.4mm) 0.157 (4.0mm) 1.00 dia. (25.4mm dia.) 0.08 (2.0mm) 8.45 dia. (215mm dia.) 0.06 dia. (1.5mm dia.) 0.295 (7.5mm) 0.07 (1.75mm) 0.63 (16.0mm) 1000 pcs / reel 0.200 (5.08mm) 0.475 (12.06mm) 0.138 (3.50mm) 0.135 (3.43mm) 0.065 (1.65mm) 120 c 150 c 180 c 260 c 0 220 c 360 sec. max. 120 s max. 10 s 60 s max. time temperature 260c
|
